5 Tips for Keeping Your Fillet Knife Sharp

5 Tips for Keeping Your Fillet Knife Sharp

A sharp knife makes better work easier and safer. You can use oil stone, water stone, or diamond stone. The gizmo knife sharpener is okay but damages the edge over time by making it thicker. Here’s how to sharpen a knife.

Until you have a drill – a wire edge forms on the side of the blade opposite the blade you are grinding – you don’t perform grinding that edge of that edge. You can see a burr. Or, feel the blade by pulling the tip of your finger off the edge – across the back of the blade, not towards the heel.

Most kitchen knives have a 20-degree bevel. For fillets, a bevel angle of 12 to 15 degrees on each side provides a clean, easy cut and reasonable resistance to tarnish. If you don’t cut a bone, single strand, or fillet with a fillet knife, the 15-degree oblique angle will serve you well.

Divide the width of the blade at the heel by 5 to get the height on the stone needed to achieve a 12-degree bevel. If your knife is 0.75 inches wide at the heel, divide 0.75 by 5 equals the spine height of 0.15 inches. You don’t like math? Stack two quarters, each 0.07 inch, to get the corner.

It does not matter. I like to lead with the edges. Pull, the edge is towards you; push, the edge is far from you.

Draw the blade through the stone, sweeping from the heel to the top as you go. When you have a full-length drill, sharpen it to create a drill on the other side. Finish with the first strokes of the blade, like cutting a piece from stone, until the burr disappears.

>> Best Electric Fillet Knife For Fish

Work Sharp Knife & Tool Sharpener

Sharpen every knife you own quickly, easily, and with consistent, repeatable results. Create the sharpest blades you have ever had!

Easy to replace Abrasive abrasive belts. It comes with premium abrasive belts to meet all your sharpening needs: Cough (P80), Medium (P220), and Fine (6000). Abrasive belts will not burn or damage the blade steel during the grinding process.

Precision grinding instructions provide fast, easy, repeatable, and consistent results. Instruction for using a kitchen knife to sharpen a blade to an angle of 40 ° – Instruction for using an outdoor knife to sharpen a blade to 50 °.

It can also be used to sharpen a variety of blurred shop tools and gardening and gardening tools such as Lawn Cutters, Garden Cutters, Scissors, Shovels, Scrap, etc. Also makes the ideal hand-held blender

1-year warranty – warranty valid only for North American 110v power applications. Do not use a power adapter for 220v. It can be powered by a 12 V (minimum 150 watts) power inverter from cars, trucks, RVs, boats, etc.

Knife A2Z – Knife Knowledge Center

See more: How to Sharpen a Fillet Knife

5 Useful, safety tips for mechanics to know

safety tips for mechanics

Mechanical work is work with many machines, heavy equipment, and grease, caustic chemicals. Therefore, the mechanic faces many dangers and injuries when doing.

The mechanical workplace should have a staff training program to ensure safety when working such as avoiding electric shock, tripping, falling, chemical burns, … and other types of accidents.

The implementation of the training program may cost some money, but it can prevent safety. Moreover, it can save millions of dollars in costs for employers when unfortunate accidents occur, compensation and legal fees.

Here are tips to improve the safety of mechanics at work

1. Mechanical work boots

As a mechanic, sometimes you have to step on wires, which is really dangerous. Therefore, a boot with resistance to electricity is extremely necessary, and it must be ASTM certified.

A mechanic is in constant contact with machines, heavy objects, and the risk of falling to his feet and getting injured is very high. Therefore, good boot needs to meet ASTM safety standards.

You should also choose mechanical work boots with soles because they often have to stand working long hours, this will help the foot to be comfortable and not hurt in the heel.

2. Gloves

In addition to being constantly exposed to hand-eating chemicals, mechanics are also exposed to hot machines and sharp equipment. So wearing protective gloves when working will help avoid hand burns and other types of injury.

3. Eye protection

Mechanical workers often use welding equipment, grinding, debris very easily shot into the eye causing injury. Wearing eye protection is therefore essential and important. In addition, protective glasses also help you avoid chemicals being shot in the eyes.

safety tips for mechanics-2

4. Poisoning

Paints and chemicals can be toxic if you have to be exposed for a long time. Therefore, when eating and resting, you should avoid the work area. All chemicals when completed should be carefully wrapped and stored in the right place, ensuring safety for employees.

5. Lifting properly

Mechanical workers must regularly lift, carry heavy equipment, so it is easy to cause back injuries. Using lifting techniques properly will prevent accidents from occurring.

Some safety measures for another mechanic

When done, need to collect, arrange furniture, equipment in place, avoid clutter.

Before working, check the work area for hazards, control it well.

Workplaces should have windows and adequate lighting. This will help the mechanic feel less stressed, moreover, if the device falls to the floor, it is also easy to find.

Above are tips to make mechanics work more safely. We hope it will be helpful for you.

See more

THE FACTS ABOUT COVID-19

Covid-19 global maps
  1. Not race, Not ethnicity, Not color, Not gender, Anyone can get a sick cause of diseases.
  2. Not the Western Countries are safer than the others: 62 countries/ regions confirmed Covid-19 cases.
  3. The signs and symptoms of Covid-19 include fever, cough, shortness of breath.
  4. Covid-19 global map (updated in 29 Feb 2020)

Covid-19 global maps

How to prevent Covid-19 Disease? CDC recommends thạt we do the following 4 things to prevent diseases:

  • Wash your hands often with soap and water for at least 20 seconds, especially after going to the bathroom; before eating; and after blowing your nose, coughing, or sneezing.

Wash your hands often with soap and water for at least 20 seconds

  • Avoid touching your eyes, nose, and mouth with unwashed hands.

Avoid touching your eyes, nose, and mouth

  • Stay home when you are sick.

Stay home when you are sick

  • Cover your cough or sneeze with a tissue, then throw the tissue in the trash.

Related infomations:

https://gisanddata.maps.arcgis.com/apps/opsdashboard/index.html#/bda7594740fd40299423467b48e9ecf6

https://www.cdc.gov/coronavirus/2019-ncov/about/share-facts.html